Efforts of tightening of threaded connections, Nanometer |
The moments of an inhaling of fixture are given also in the text of the Head and on some illyustratsiyakh*. |
* The moments of an inhaling highlighted in the text in bold type are subject to exact observance; the efforts which are not highlighted in bold type are given only approximately |
Fastenings of the engine/RKPP back support
|
Bolts (2) | 25
|
Bolts (3) cross-pieces behind to a body | 40
|
Bolt or nut of fastening of a support of the engine to the check point | 50
|
Driveshaft flange nuts to RKPP: |
|
| 40
|
|
| 60
|
Plait of cables to RKPP
|
|
| 15
|
|
| 10
|
Holder of the pipeline of coupling | 9.5
|
The coupling pipeline to the working cylinder | 16
|
Weight point on RKPP | 10
|
Stopper of removal of RKPP oil | 60
|
Stopper of RKPP gas station oil | 50
|
Accumulator collar at RKPP case | 15
|
The ventilation case at RKPP | 6
|
Square to RKPP case | 3
|
The bridge of the central block of gear shifting to the bottom | 23
|
The backing lamp switch to RKPP case | 10
|
Payment of sensors to RKPP case | 3
|
Lock plate to RKPP | 9
|
The connecting plug to the central axis of gear shifting | 11.5
|
The movement sensor to the coupling switching off lever | 3
|
Coupling switching off lever |
to RKPP | 9
|
to a coupling casing | 8 |