Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   + Automatic transmission 722.6
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Specifications

 Separate characteristics are provided also in the text of the Head and in case of obligation of their performance are highlighted in bold type.


General parameters
Type
5-staged, automatic with electronic control by gear shifting or 6-staged, automated by the Sequentronic check point
Designation
722.6 (W5A 330/580) or 716.6 respectively
The applied liquid
7.0 l, MB No. 001 989 21 03 10
9.0 l, MB No. 001 989 21 03 10
Codes of diagnostics of system of electronic control by automatic transmission see the Head Elektrooborudovaniye of the engine.
Transfer relations and turning on of AT 722.6 activators

* Switching activators only in the mode kik-Down

Main transfer
3.06: 1 (3.27: 1)

Fastenings of a back support of the engine/check point

Bolts (2)

25

Bolts (3) cross-pieces behind to a body

40

Bolt or nut of fastening of a support of the engine to the check point

50

Driveshaft flange nuts to the check point:

M10

40

M12

60
716.6

Plait of cables to RKPP

  • below on the right
15
  • below at the left
10

Holder of the socket of sensors of an angle of rotation

10

Holder of the central socket

10

Weight point at the check point

10

Stopper of removal of oil of the check point

60

Stopper of filling of the check point with oil

50

Accumulator collar at a check point case

15

Bolt of fastening of the sensor of an angle of rotation to a sensor level

3

The ventilation case at the check point

6

The hydraulic block at the check point

  • above
7.5
  • below
9.5

The pump to a check point case

7.5

Square to a check point case

3

The tank to a check point case

9.5

The bridge of the central block of gear shifting to the bottom

23

The backing lamp switch to a check point case

10

Payment of sensors to a check point case

3

Lock plate to the check point

9

The connecting plug to the central axis of gear shifting

11.5

The movement sensor to the coupling switching off lever

3

722.6

Oil stopper of AT

20

Oil stopper of the AT hydrotransformer

16

Pallet AT bolts

8

Lock screw of draft of the AT selector

12

Bolt of fastening of the hydrotransformer to a drive plate of M8

42

Drain stopper in the transmission pallet

20

Nut of fastening of the driveshaft to the M12 transmission

60

Bolt of fastening of the electromagnetic valve to a gear shifting plate

8

Bolt of fastening of a cover of the case of valves to the case of M6x30 valves

8

Bolt of fastening of a side cover to a cover of the case of valves and the case of M4x12 valves

4

Bolt of fastening of the case of transmission to the hydrotransformer case

20

Bolt of fastening of the pallet to the case of transmission 8

Nut of fastening of a flange of an output shaft

200

Bolt of fastening of the electrohydraulic control unit to the transmission case

8

Bolt of fastening of a multidisk brake of B2 to the transmission case

16

Bolt of fastening of a doggie to the gear shifting selector lever

8

Drain stopper of the hydrotransformer

16