Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car

Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
- Engine electric equipment
   + System of ignition and engine management
   - System of preheat of the diesel engine
      Check of candles of an incandescence
      Removal and installation of candles of an incandescence
   + Diagnostics of systems of electronic control and diagnostic equipment
   + Systems of a charge and start
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of candles of an incandescence

Removal

PERFORMANCE ORDER

1. Switch off ignition.
2. Remove the top covers of the engine, address the Section Removal and installation of the top cover of the engine.
3. Disunite sockets of candles of an incandescence by means of, for example, special clip of HAZET 4760-5.
4. Turn out glow plugs, for example, by means of the HAZET 4760-1 tool.
5. Clear the mine under a candle a brush for candles from a perlon of Ø10 and 6 mm.

Installation

PERFORMANCE ORDER

1. Screw glow plugs and tighten their moment 12 Nanometers.
2. Join sockets of candles of an incandescence.
3. Establish into place the top covers of the engine, address the Section Removal and installation of the top cover of the engine.