Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Specifications
   Replacement of blocks of a forward disk brake
   Removal and installation of a forward support
   Replacement of back brake shoes
   Removal and installation of a back support
   Removal and installation of a brake disk
   Check of a brake disk
   Dual main brake cylinder
   Replacement of brake shoes of the parking brake
   Removal and installation of a cable of the drive of the parking brake
   Removal and installation of the switch of a stoplight
   Removal of air from the brake system
   Removal and installation of a brake hose
   Check of the amplifier of a brake
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Removal and installation of the switch of a stoplight

1 — the stoplight Switch 2 — a brake Pedal

The switch of a stoplight is located on a brake pedal support. Check operation of the switch of a stoplight, address the Section of Chapter 60.

Removal

 PERFORMANCE ORDER

1. Switch off ignition.
2. Uncover under the dashboard from the driver.
3. Disunite the socket of the switch of a stoplight (1).

4. Press a stopper (1), turn the switch to the right and take out it from the holder.


Installation

 PERFORMANCE ORDER

1. Take out a pusher (2) of the new switch of a stoplight against the stop. Thus the maximum size of the course is created "and".
2. Completely press a brake pedal. Insert the switch and turn to the left so that the stopper (1) was recorded.
3. Release a brake pedal. At the same time the course of a pusher is established.
4. Join the stoplight switch socket.
5. Check whether the stoplight lamp lights up by insignificant pressing a pedal.
6. Establish into place a cover under the dashboard from the driver, address appropriate section.