Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car


Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Angles of installation of wheels of the car
      The angles of installation of wheels of the car - the general information
      Conditions of check of angles of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of clearance of a body of the car
   + Steering and safety cushions
+ Body
+ Onboard electric equipment



Conditions of check of angles of installation of wheels

Check of angles of installation of the car demands existence of a viewing ditch or the special measuring elevator. When carrying out measurement it is necessary to satisfy the following conditions:

· Air pressure in tires corresponds to set.
· Forward wheels are put directly.
· The car is not loaded, the fuel tank is completely filled.
· Suspension brackets of the car were with an osazhena force.
· Steering is adjusted.
· Side plays in connections of steering drafts lie within admissible.
· Side plays in connections of a suspension bracket lie within admissible.
· Depth of the drawing of a protector of tires of one axis is identical.