Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   - Suspension bracket of back wheels
      Removal and installation of the back shock-absorber
      Removal and installation of a back spring
   + Angles of installation of wheels of the car
   + Steering and safety cushions
+ Body
+ Onboard electric equipment




Suspension bracket of back wheels

General information

Suspension bracket of back wheels

1 — the Drive of back wheels
2 — the Main transfer
3 — the Screw spring
4 — the Shock-absorber
5 — the Beam of a back suspension bracket
6 — the Torsion stabilizer of cross stability
7 — the Lever of a back suspension bracket

The suspension bracket of back wheels is executed in the form of spatial multilever system and consists of a beam to which bolts via rubber-metal bearings suspension bracket levers fasten. Before a beam there is a stabilizer of cross stability (except the C180 model) reducing the body inclination at turn and also interfering raising of internal software to the relation to turn of a back wheel.

For depreciation of a body two screw springs serve. Gas-filled shock-absorbers are located near springs. Such design occupies insignificant volume in a luggage carrier or a cargo compartment.