Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
- Engine
   Check of a compression in engine cylinders
   Check of the engine by means of the vacuum gage
   Removal and installation of a cover of a motive compartment from the bottom
   + 4-cylinder petrol engines
   + 6-cylinder petrol engines
   - Diesel engines
      Removal and installation of the top cover of the engine
      Installation of the piston of the first cylinder in the provision of VMT
      Removal and installation of a cover of a head of cylinders
      Removal and installation of a head of cylinders
      Removal and installation of a forward cover
      Removal and installation of the top guide of a chain
      Replacement of chains of the GRM drive and installation of phases of gas distribution
      Removal and installation of camshafts
      Removal and installation of an intermediate asterisk
      Removal and installation of a natyazhitel of a chain
      Removal and installation of a maple belt
   + Engine lubrication system
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment







Removal and installation of an intermediate asterisk

Removal

 PERFORMANCE ORDER

1. Remove the top covers of the engine, address appropriate section.
2. Remove nozzles, address the Section Removal and installation of nozzles.
3. Uncover a head of cylinders, address appropriate section.
4. Install the piston of the first cylinder in the provision of VMT, address the Section Installation of the Piston of the First Cylinder in the provision of VMT.
5. Fix the camshaft of inlet valves as it is described in the Section Removal and installation of camshafts.
6. Remove a natyazhitel of a chain, address appropriate section.
7. Remove a forward cover, address appropriate section.
8. Remove the top guide, address appropriate section.
9. Remove TNVD.
10. Mark a camshaft asterisk in relation to a chain. For this purpose connect an asterisk and a chain a cable connector.
11. Disconnect an asterisk from the camshaft of final valves and remove together with a chain.
12. Disconnect an intermediate asterisk and take out together with the plug.


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal. Separate operations are described in the Section Removal and installation of camshafts.
The moment of an inhaling of a bolt of fastening of an intermediate asterisk of TNVD makes 40 Nanometers.