Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures when carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Damages of a windshield as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windshield
      Removal and installation of the lever of a back screen wiper
      Removal and installation of a catchment basin
      Removal and installation of a cowl
      Removal and installation of facing of a cowl
      Adjustment of a cowl
      Removal and installation of the lock of a cowl
      Drive cable detachment from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and installation of a bumper
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Adjustment of a door
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and installation of a trunk lid
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and door of a back
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + Equipment of salon
+ Onboard electric equipment




Removal and installation of the lock of a cowl

The cowl lock having the heavy course is not greased, and replaced.


Removal

 PERFORMANCE ORDER

1. Open a cowl and establish it vertically.

2. Mark the provision of a clamp of the lock (1) by means of a felt-tip pen.

3. Turn out fastening bolts (arrows on an illustration) and remove a clamp from a cowl.

4. Mark position of the lock of a cowl (1) by means of a felt-tip pen.

5. Turn out fastening bolts (arrows on an illustration) and take out the lock (1) from the forward panel at a radiator.
6. Disconnect a cowl drive cable from the lock and take out the lock.

7. Mark the provision of a lock hook (1) on a cowl by means of a felt-tip pen.

8. Turn out fastening bolts (arrows on an illustration) and remove a lock hook (1) from a cowl.


Installation

 PERFORMANCE ORDER

1. Fix a lock hook on a cowl according to a tag the moment of 8 Nanometers.
2. Put the cowl lock in the forward panel at a radiator, connect a drive cable to the lock and fix a cable on the forward panel.
3. Fix the lock according to a tag on the forward panel at a radiator the moment of 8 Nanometers.
4. Fix a clamp according to a tag on a cowl the moment of 8 Nanometers.
5. Close a cowl check operation of the lock, and also a lock hook. If necessary weaken bolts of fastening and displace the cowl lock.