Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment




Removal and installation of facing in a cargo compartment

Versatile person

Removal

 PERFORMANCE ORDER

1. Cast away a back seat forward and establish it vertically.
2. Remove a side pillow of a back seat, at the same time turn out a bolt under a seat and take out a pillow from holders.

3. Uncover the screw-driver (1).

4. Turn out a bolt (2) and remove the left luggage eye.
5. Remove also right luggage eye.
6. Take out a cover of the bottom (3) behind a back seat.
7. Turn out a screw emphasis (4) for a roller. Remember its situation: The roller after installation has to adjoin to the right and left screw emphasis.
8. Uncover a side aperture.
9. Turn out 2 screws (5).
10. Disunite the socket of the socket (6) and take out side facing (7).


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.