Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment




Removal and installation of a ware box

Removal

 PERFORMANCE ORDER

1. Remove the central console, address appropriate section.
2. Uncover the top part of the central console, address appropriate section.
3. Remove the radio receiver or the navigation device with the big monitor if they are established, address the Section Removal and installation of the radio receiver.

4. Turn out fastening screws on side facing (1) of the top part of the central console.

5. Uncover under a ware box, address appropriate section.
6. Turn out the screw (the shooter on an illustration) under a ware box on the left side.
7. Open a cover of a ware box and turn out from above 2 screws (2).
8. Take out a cover on the party of the forward passenger sideways at the dashboard.

It is uncovered similar to removal of a cover of the block of safety locks, address the Section the Relay and safety locks.

9. Turn out 2 screws (3) sideways to the dashboard.
10. Disunite the socket of the lighting lamp of a ware box.
11. Remove a ware box with facing (1) of the top part of the central console.


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.