Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment


Access exclusive content and early releases on Soap2day.


Removal and installation of the central console

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Open an ashtray cover, press forward an insert and release it. Take out an ashtray insert.

3. By means of the screw-driver wring out lock levels (arrows on an illustration) at the left and on the right, release the case of an ashtray (1) and take out it. At the same time take out the case for an ashtray cover.

4. Carefully disunite the ashtray lighting lamp socket. The lamp can be broken easily.
5. Take out an ashtray from the central console.

6. By means of a plastic wedge, for example, of HAZET 1965-20 take out a frame of a protective cover (1) of the lever of switching of transfers/selector from the central console.

7. AT selector: Disconnect the plug from a reverse side of a frame of a protective cover from a level of switches.
8. Turn counterclockwise the handle (2) and remove from the lever/selector.

9. Disconnect strong breakthrough a cover (1) of the lever/selector from two holders of clips.

10. Pull a cover from a guide forward and take out from the central console.
11. Depending on model disconnect the socket from a reverse side of a cover from a level of switches.
12. Take out a cover from the central console.

13. Turn out 2 screws (1).

14. Disconnect side covers (2) on the right and at the left in console tunnels.
15. Turn on Ѕ a turn the screws (3) (2 pieces) located behind covers and disconnect the central console.

16. Displace a cover (1) over the lighter in the central console back. (4) – big pocket.

17. By means of the screw-driver disconnect the holder of cans (2).
18. Slightly press on a small pocket (3) outside, incline it aside and take out from the central console.
19. Disconnect a support for the lighter from the holder, press back and disunite the socket as it is described in the Section Removal and installation of the lighter.

20. Turn out 2 screws (1) under the lighter.

At model 722.6 AT the self-stopped screws at installation need to be replaced with new and to adjust draft of switching.

21. Release the central armrest and cast away it up.

22. Take out a rug in a big pocket (1) and turn out the screws (2) lying under it.

23. Raise behind the central console and remove it from a floor.


Installation

 PERFORMANCE ORDER

1. Installation is carried out in the sequence, the return to removal.
2. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.