Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment






Removal and installation of the lower part of the dashboard

Removal

 PERFORMANCE ORDER

1. Remove the central console, address appropriate section.
2. Uncover the top part of the central console, address appropriate section.
3. Remove the radio receiver or the navigation device, address the Section Removal and installation of the radio receiver.
4. Unscrew screws of fastening of a cover under the dashboard and cast away a cover, address appropriate section.
5. Uncover the block of safety locks, address the Section the Relay and safety locks.
6. Remove the left group of switches, address the Section Removal and installation of group of switches to the left of the control panel.

7. Turn out 2 screws from below.

8. Turn out fastening screws at the upper left and at the central console.

9. By means of a plastic wedge disconnect the lower part of the dashboard from holders.
10. By means of a cam key 210 589 00 07 00th MERCEDES disconnect the socket (1) of the switch of ignition and disconnect the control unit of start from the lower part of the dashboard.
11. Disconnect a cable at the handle of release of the parking brake and remove the lower part of the dashboard.


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.