Mercedes C-Class

1. Release a back seat and cast away it forward.
2. Turn off a bolt of fastening of a seat belt under a seat.
3. Disconnect a fringing along a rack of C.

4. Take out a SRS cover (1) from facing and turn out the bolt which is under it.

5. Insert a plastic wedge into a gap between facing of a rack of C and facing of a roof and disconnect facing.
6. Disconnect facing at brackets (2) from a rack of C (an arrow on an illustration) and remove it from the directing shelf forward.
7. Carry out a seat belt through a groove in facing.

1. Installation is carried out in the sequence, the return to removal.
2. Fix a seat belt under a back seat the moment of 30 Nanometers.

1. Release a back seat and cast away it forward.
2. Remove a side pillow of a back of a back seat as it is described in the Section Removal and installation of a back seat.
3. Remove a fringing along a rack of C.
4. Uncover and disconnect a bracket of turn of a belt at a rack of C.
5. remove facing in a cargo compartment, address appropriate section.

6. Disconnect facing of a rack of C of the holder of a bracket (2).

7. Take out a seat belt from the facing directing a belt.

1. Installation is carried out in the sequence, the return to removal.
2. Fix a bracket of turn of a belt on a rack by the C moment of 30 Nanometers.