Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment




Removal and installation of a front seat

Removal

 PERFORMANCE ORDER

1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.

Before a detachment of a cable find out a protective code of the radio receiver if that is available, address the Section Replacement of the Rechargeable Battery.

2. Lower a head restraint and a steering wheel.
3. Displace a seat completely forward.

4. Uncover over a belt tip. Turn out a bolt at a tip.

5. Turn out 2 bolts behind at seat guides.

6. Displace a seat completely back. If there is a fire extinguisher, take out it from the holder and turn out 2 bolts in front at seat guides.

7. Disunite sockets (1) and (2) under a seat.

8. Take out a seat.


Installation

 PERFORMANCE ORDER

1. Establish a seat into place. At the same time the lock finger at guides of a seat has to enter an opening.
2. Join sockets under a seat.
3. Fix the directing seats in front and behind by the moment of 50 Nanometers.
4. Fix a belt tip bolt by the moment of 30 Nanometers.
5. Establish to the place of a cover.
6. Install the fire extinguisher in the holder.
7. Attach a negative cable (-) to the rechargeable battery at the switched-off ignition. Establish into place a box of the filter of air of salon. Enter a code of the radio receiver and determine time on hours.