Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car


Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and the operating signals
      Removal and the AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes of B2, B3 and gear wheel of blocking at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of a multidisk brake B1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of a multidisk brake of B1
      Dismantling and assembly of a multidisk brake of B2
      Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings K1, K2 and K3
      Dismantling and assembly of coupling of K1
      Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling of K3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

набор глазной хирургический набор для промывания слезного канала.

Removal and installation of multidisk couplings K1, K2 and K3

Removal and installation of multidisk couplings K1, K2 and K3

12 — the Output shaft with the central and back block of planetary gear wheels and coupling of K3
13 — the Persistent needle bearing
13a — Persistent laying
58 — the Conducting shaft with coupling by K2 and the forward block of planetary gear wheels
58a — Teflon rings 		83 — Coupling of K1
138 — the Solar gear wheel of the forward block of planetary gear wheels
And — the Oil channel for coupling blocking
In — the Oil channel to coupling of K2

Removal

 PERFORMANCE ORDER

1. Disconnect the transmission case from the case the hydrotransformer.
2. Remove an output shaft with the central and back blocks of planetary gear wheels and coupling of K3 (12).
3. Remove the persistent needle bearing (13) and persistent laying (13a).
4. Remove the conducting shaft with coupling K2 and the forward block of planetary gear wheels (58).
5. Remove coupling of K1 (83).


Installation

 PERFORMANCE ORDER

1. Grease and establish everything together teflon rings in a groove in B1 brake.
2. Establish coupling of K1 (83).
3. Grease and establish everything together teflon rings (58a) in a groove of coupling of K2.
4. Establish the conducting shaft with coupling K2 and the forward block of planetary gear wheels (58).
5. Establish persistent laying (13a) and the persistent needle bearing (13).
6. Establish an output shaft with the central and back block of planetary gear wheels and coupling of K3 (12).
7. Install the transmission case on the hydrotransformer case.