Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and the operating signals
      Removal and the AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes of B2, B3 and gear wheel of blocking at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of a multidisk brake B1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of a multidisk brake of B1
      Dismantling and assembly of a multidisk brake of B2
      Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings K1, K2 and K3
      Dismantling and assembly of coupling of K1
      Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling of K3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling

Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling

45a — the Hollow shaft
45b — the Sealing ring
45s — the Lock ring
45d — the Coupling of a free wheeling
45e — the Back solar gear wheel with an internal support of coupling K3
45f — the Persistent needle bearing
45g — Laying
45h — the Blocking ring

Dismantling

 PERFORMANCE ORDER

1. Disconnect the transmission case from the case the hydrotransformer.
2. Remove multidisk couplings of K1, K2 and K3.
3. Remove a blocking ring (45h), laying (45g) and the persistent needle bearing (45f) from a hollow shaft (45a).
4. Remove a back solar gear wheel (45e) together with an internal support of coupling K3 and the back coupling of a free wheeling (45d).
5. Remove a lock ring (45s) from the coupling of a free wheeling (45d).
6. Remove the coupling of a free wheeling from a solar gear wheel.


Assembly

 PERFORMANCE ORDER

Assembly is carried out as it should be, the return to dismantling. Check correctness of installation of lock rings. Check them and if it is necessary, replace them. Persistent laying of the coupling of a free wheeling (45d) has to settle down in the direction to a lock ring (45s).